Aggregation-Induced Emission (AIE) is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known Aggregation-Caused Quenching (ACQ). AIE has the potential to be utilized in the large-scale production of AIE-active polymeric materials because of their wide range of practical applications such as stimuli-responsive sensors, biological imaging agents, and drug delivery systems. This is evident from the increasing number of publications over the years since AIE was first discovered. In addition, the ever-growing interest in this field has led many researchers around the world to develop new and creative methods in the design of monomers, initiators and crosslinkers, with the goal of broadening the scope and utility of AIE polymers. One of the most promising approaches to the design and synthesis of AIE polymers is the use of the Reversible-Deactivation Radical Polymerization (RDRP) techniques, which enabled the production of well-controlled AIE materials that are often difficult to achieve by other methods. In this review, a summary of some recent works that utilize RDRP for AIE polymer design and synthesis is presented, including (1) the design of AIE-related monomers, initiators/crosslinkers; the achievements in preparation of AIE polymers using (2) Reversible Addition-Fragmentation Chain Transfer (RAFT) technique; (3) Atom Transfer Radical Polymerization (ATRP) technique; (4) other techniques such as Cu(0)-RDRP technique and Nitroxide-Mediated Polymerization (NMP) technique; (5) the possible applications of these AIE polymers and finally (6) a summary/perspective and the future direction of AIE polymers.

Photoresponsive supramolecular materials have been fabricated by controlling the density of reversible cross-links or the distribution of movable cross-links. This study prepared photoresponsive polyurethane (CD-Azo-PU) based on controlling the crystallization of the hard segments in polyurethane (PU) by complexation between azobenzene (Azo) and cyclodextrins (CDs). CD-Azo-PU incorporated polyurethane as the main chain and a 1:2 inclusion complex between Azo and γCD as a movable crosslink point. Upon ultraviolet light (UV, λ = 365 nm) irradiation, the photoresponsiveness of CD-Azo-PU bent toward the light source (defined as positive), while that of the linear Azo polyurethane (Azo-LPU) without TAcγCD-diOH as a movable crosslinker bent in the direction opposite the light source. The bending rates were determined to be 0.058°/s for CD-Azo-PU and 0.027°/s for Azo-LPU, indicating that the bending rate for CD-Azo-PU was faster than that for Azo-LPU. By incorporating movable cross-links into CD-Azo-PU, we successfully achieved specific photoresponsive actuation with an enhanced rate.

Gold nanoparticles (GNPs) are promising materials for many bioapplications. However, upon contacting with biological media, GNPs undergo changes. The interaction with proteins results in the so-called protein corona (PC) around GNPs, leading to the new bioidentity and optical properties. Understanding the mechanisms of PC formation and its functions can help us to utilise its benefits and avoid its drawbacks. To date, most of the previous works aimed to understand the mechanisms governing PC formation and focused on the spherical nanoparticles although non-spherical nanoparticles are designed for a wide range of applications in biosensing. In this work, we investigated the differences in PC formation on spherical and anisotropic GNPs (nanostars in particular) from the joint experimental (extinction spectroscopy, zeta potential and surface enhanced Raman scattering [SERS]) and computational methods (the finite element method and molecular dynamics [MD] simulations). We discovered that protein does not fully cover the surface of anisotropic nanoparticles, leaving SERS hot-spots at the tips and high curvature edges “available” for analyte binding (no SERS signal after pre-incubation with protein) while providing protein-induced stabilization (indicated by extinction spectroscopy) of the GNPs by providing a protein layer around the particle’s core. The findings are confirmed from our MD simulations, the adsorption energy significantly decreases with the increased radius of curvature, so that tips (adsorption energy: 2762.334 kJ/mol) would be the least preferential binding site compared to core (adsorption energy: 11819.263 kJ/mol). These observations will help the development of new nanostructures with improved sensing and targeting ability.

Transparent afterglow crystals are keenly desired for three-dimensional information storage. Herein, CsCdCl3 perovskite crystals were grown by a programmable cooling procedure in a hydrothermal reactor. The pristine crystal showed an abnormal optical behavior where the absorption increased by 2.3 folds at high temperature, leading to a 4-fold boost of PL intensity. After Mn2+ doping, the PL QY was improved to nearly unity. Importantly, the doped crystals exhibited an ultralong afterglow up to 12 hours after ceasing UV excitation and a high transmittance up to 75% in the visible region. This work brought a new member to the library of transparent afterglow crystal, opening up many possibilities to advanced applications such as volumetric display and three-dimensional information encryption.

Macroscopic chiral spherulites prepared by hierarchical self-assembly have attracted considerable attention due to their excellent property as chiroptical materials. However, preparing controllable handedness spherulites in bulk film remains a challenge due to the absent knowledge of the evolution mechanism from the molecule to macroscopic crystal during chiral assembly. In this contribution, we constructed chiral controllable macroscopic spherulites with circularly polarized luminescence (CPL) using enantiomeric tartaric acid and Rhodamine B co-assembled with liquid crystal block copolymers, poly (ethylene oxide)-b-poly (methyl methacrylate) bearing azobenzene group side chains. It was found that the chiral liquid crystal field induced by exogenous chiral molecules was closely related to the formation of macroscopic chiral spherulites. Moreover, the transformation of azobenzene cis-trans isomerization under photo-thermal endows films with adjustable CPL. This facile strategy provides a platform to design large-scale chiral structures for chiroptical switching, encryption, and memory storage materials.

The efficacy of nanoparticle (NP)-based drug delivery technology is hampered by aberrant tumor stromal microenvironments (TSMs) that hinder NP transportation. Therefore, the promotion of NP permeation into deep tumor sites via the regulation of tumor microenvironments is of critical importance. Herein, we propose a potential solution using a dihydrazidine (HDZ)-loaded nanoparticle drug delivery system containing a pH-responsive, cyclic RGD peptide-modified prodrug based on doxorubicin (cRGD-Dex-DOX). With a combined experimental and theoretical approach, we find that the designed NP system can recognize the acid tumor environments and precisely release the encapsulated HDZ into tumor tissues. HDZ can notably downregulate the expression levels of hypoxia-inducible factor 1α (HIF1α), α-smooth muscle actin, and fibronectin through the dilation of tumor blood vessels. These changes in the TSMs enhance the enrichment and penetration of NPs and also unexpectedly promote the infiltration of activated T cells into tumors, suggesting that such a system may offer an effective “multifunctional therapy” through both improving the chemotherapeutic effect and enhancing the immune response to tumors. In vivo experiments on 4T1 breast cancer bearing mice indeed validate that this therapy has the most outstanding antitumor effects over all the other tested control regimens, with the lowest side effects as well.

Direct visualization of polymer crystalline structure remains challenging due to the lack of contrast across different microphases of polymers. Here we address this conundrum using an aggregation-induced emission luminogen (AIEgen) with confinement fluorescence effect, which could be used as a “built-in” sensor to label different crystalline phases. Computational simulations reveal that the confined space induces the AIEgens to take a more planar conformation, resulting in a red-shifted emission spectrum. With this property, the information of various polymer crystalline forms is converted into different fluorescence colors, which is attributed to the different spatial dimensions of the polymer amorphous layer between lamellar crystals where the AIEgens are located. Finally, polymer crystalline phases distinction, quantitative crystallinity determination, and stereocomplex crystals visualization are achieved, providing a relationship between crystalline microstructure and fluorescence signals. This work demonstrates the potential of AIE fluorescence technology in polymer science, providing a theoretical and experimental guideline for the materials processing and optimization of mechanical performance.

Stimulating and harnessing circularly polarized luminescence (CPL) is not only a sine qua non for fundamentally unveiling chirogenesis in physical chemistry, and also a pivotal prerequisite for implementation of such phenomenon in area of chiral optoelectronics and theranostics. Herein, red-emissive carbonized polymer dots (CPDs)-based helical structures were synthesized in this work via biomolecule-tailored organic-inorganic co-assembly strategy. The surface states related chirality exhibited enhanced circular dichroism (CD) and CPL activities with anisotropic factors as high as gCD,max=5.4×10-3 and glum,max=1.5×10-2 respectively. The obtained CPL signals can be further manipulated with an excitation-dependent manner indicating a synergistic-competition phenomenon is existed between configurational chirality and intermolecular energy-transfer dynamics, which is further supported by simulations based on density function theory (DFT). Such tunable CPL behaviors triggers revolutionary designs and applications of these chiral CPDs into the realm of chirality-related biological issues and next generation chiral optoelectronics.

Antibiotic resistance is a major challenge in the clinical treatment of bacterial infectious diseases. Herein, we constructed a multifunctional DNA nanoplatform as a versatile carrier for bacteria-specific delivery of clinical antibiotic ciprofloxacin (CIP) and classic nanoantibiotic silver nanoparticles (AgNP). In our rational design, CIP was efficiently loaded in the self-assembly double-bundle DNA tetrahedron through intercalation with DNA duplex, and single-strand DNA-modified AgNP was embedded in the cavity of the DNA tetrahedron through hybridization. With the site-specific assembly of targeting aptamer in the well-defined DNA tetrahedron, the bacteria-specific dual-antibiotic delivery system exhibited excellent combined bactericidal properties. With enhanced antibiotic accumulation through breaking the out membrane of bacteria, the antibiotic delivery system effectively inhibited biofilm formation and promoted the healing of infected wounds in vivo. This DNA-based antibiotic delivery system provides a promising strategy for the treatment of antibiotic-resistant infections.

Centrifugal and shear forces are produced when solids or liquids rotate. Rotary systems and devices that use these forces, such as dynamic thin-film flow technology, are evolving continuously, improving material structure-property relationships at the nanoscale, representing a rapidly thriving and expanding field of research high with green chemistry metrics, consolidated at the inception of science. The vortex fluidic device (VFD) provides many advantages, with fluidic waves causing high shear and producing large surface areas for micro-mixing as well as rapid mass and heat transfer, enabling reactions beyond diffusion control in the processing. Combining these abilities allows for a green and innovative approach to altering materials for various research and industry applications by controlling small-scale flows and regulating molecular and macromolecular chemical reactivity, self-organization phenomena, and the synthesis of novel materials. This review highlights the aptitude of the VFD as clean technology, with an increase in efficiency for a diversity of top-down, bottom-up, and novel material transformations, benefiting from effective vortex-based processing for the transformation of material structure-property relationships.

The development of green and simple chemiluminescence (CL) systems with intensive and long-lasting emission is highly desirable in lighting and extension of their applications. In this study, it is found that the involvement of aggregation-induced emission (AIE) surfactant could greatly enhance the CL of luminol–H2O2–Co2+ system. The inserted hydrophobic tetraphenylethylene fluorophore in AIE is able to increase the hydrophobicity of alkyl chain and decrease the critical micelle concentration (CMC) of surfactant. The synergistic effect of micelle-improved enrichment and CL resonance energy transfer endows luminol–H2O2–Co2+ system intensive and long-lasting emission under neutral pH conditions (pH 7.4). The visible emission is still observed even after 60 min. Our study has opened a new avenue for exploring green and simple effective CL systems through AIE surfactant with unltralow CMC toward various applications in lighting, optical sensing, and photocatalysis, etc.

Flame retardants play a crucial role in improving the flame retardant properties of polymer materials. In recent years, environmental problems caused by flame retardants have attracted widespread attention. It is urgent to use green and effective methods to prepare flame retardant polymers. Bioinspired nanocomposites with layered structures seem to provide an effective idea, but in general, the hydrophilic properties of their raw materials limit their applications in certain fields. Here, we prepared biomimetic composites with a layered “brick-and-mortar” structure by gravity-induced deposition using polyimide as the polymer matrix and montmorillonite (MMT) as the filler. The well-arranged structures of the composite material could isolate oxygen and prevent combustible gases from escaping. The gas barrier performance has been greatly improved, in which the water vapor transmission rate (WVTR) and the oxygen transmission rate (OTR) decreased by 99.18% and three orders of magnitude, respectively. The flame retardant performance has also been improved, and its limiting oxygen index can reach 67.9%. More importantly, the polyimide matrix can be converted to water-insoluble by thermal imidization of water-soluble poly (amic acid) salt precursors, which endows the composites with low hygroscopicity. Such coating containing MMT can protect against polyurethane (PU) foam from fire. During the conical calorimetric test, the coated sample self-extinguished, and the peak heat release rate, total heat release, total smoke production is significantly decreased by 53.39%, 40.69%, and 53.03%, respectively. Taking advantage of these properties, this work utilizes a facile method to prepare biomimetic composites with low moisture absorption, excellent gas barrier properties, and flame retardancy, which have great application potential.

Fluorescent-magneto nanoemitters have gained considerable attention for their applications in mechanical controlling-assisted optical signaling. However, the incompatibility between magnetic and fluorescent components often leads to functional limitations in traditional magneto@fluorescence nanostructure. Herein, we introduce a new compact-discrete spatial arrangement on a “fluorescence@magneto” core–shell nanostructure consisting of a close-packed aggregation-induced emission luminogen (AIEgen) core and a discrete magnetic shell. This structural design effectively eliminates the optical and magnetic interferences between the dual components by facilitating AIEgens loading in core region and reducing the magnetic feeding amount through effective exposure of the magnetic units. Thereby, the resulting magneto-AIEgen nanoparticle (MANP) demonstrates “win-win” performances: (i) high fluorescent intensity contributed by AIEgens stacking-enhanced photoluminescence and reduced photons loss from the meager magnetic shell; (ii) marked magnetic activity due to magneto extraposition-minimized magnetic shielding. Accordingly, the dual functions-retained MANP provides a proof of concept for construction of an immunochromatographic sensing platform, where it enables bright fluorescent labeling after magnetically enriching and separating procalcitonin and lipoarabinomannan in clinical human serum and urine, respectively, for the clinical diagnosis of bacterial infections-caused inflammation and tuberculosis. This study not only inspires the rational design of magnetic-fluorescent nanoemitter, but also highlights promising potential in magneto-assisted point-of-care test and biomedicine applications.

Molecular aggregation affects the electronic interactions between molecules and has emerged as a powerful tool in material science. Molecular aggregation finds wide applications in the research of new physical effects; however, its value for chemical reaction development has been far less explored. Herein, we report the development of aggregation-enabled alkene insertion into carbon–halogen bonds. The spontaneous cleavage of C–X (X = Cl, Br, or I) bonds generates an intimate ion pair, which can be quickly captured by alkenes in the aggregated state. Additional catalysts or promoters are not necessary under such circumstances, and solvent quenching experiments indicate that the aggregated state is critical for initiating such sequences. The ionic insertion mode and the intimate ion pair mechanism are supported by mechanistic studies, density functional theory calculations, and symmetry-adapted perturbation theory analysis. Results show that the non-aggregated state may quench the transition state and terminate the insertion process.

The co-assembly of charged nanoparticles with oppositely charged molecular ions has emerged as a promising technique in the fabrication of nanoparticle superstructures. However, the underlying mechanism behind these molecular ions in mediating the repulsion between these charged nanoparticles remains elusive. Herein, coarse-grained molecular dynamics simulations are used to elucidate the effects of valency, shape and size of molecular anions on their co-assembly with gold nanoparticles coated with positively charged ligands. The findings suggest that the valency, shape and size of molecular anions significantly influence the repulsion and aggregating dynamics among these positively charged nanoparticles. Moreover, the free energy calculations reveal that ring-shaped molecular anions with higher valencies and larger sizes are more effective at reducing the repulsion between these gold nanoparticles and thus enhance the stability of the aggregate. This study contributes to a better understanding of the critical roles of valence, shape and size of ions in mediating the electrostatic co-assembly of nanoparticles with oppositely charged ions and it also guides the future design of DNA templates and DNA origami in co-assembly with oppositely charged nanoparticles.

Carbon dots (CDs) possess outstanding luminescence properties, leading to their use in a wide range of applications including optical displays, anti-counterfeiting systems, bioimaging and sensors. Presently, there is much debate about the classification of CDs, as well as their formation process, structure and fluorescence mechanisms. Aggregation plays an important role in both the formation of CDs and their fluorescence (e.g. aggregation-induced emission), yet is seldom studied in detail. This review aims fill this knowledge gap, by firstly exploring how aggregation leads to the formation of different types of CDs (e.g. graphene quantum dots, carbon quantum dots, and carbonized polymer dots), followed by a detailed examination of the effect of aggregation-induced morphology on the luminescence properties and application of CDs. Finally, opportunities and challenges for the application of CDs in various applications are discussed, with the need for better mechanistic understanding of aggregation-induced luminescence being an imperative.

The side-chain has a significant effect on the optical properties and aggregation behaviors of the organic small molecule acceptors, which becomes an important strategy to optimize the photovoltaic performance of organic solar cells (OSCs). In this work, we designed and synthesized three novel nonfused ring electron acceptors (NFREAs) OC4-4Cl-Ph, OC4-4Cl-Th and OC4-4Cl-C8 with hexylbenzene, hexylthiophene and octyl side chains on the π-bridge units. Compared with OC4-4Cl-Ph and OC4-4Cl-Th, OC4-4Cl-C8 with linear alkyl side chain has more red-shift absorption, which is conducive to obtaining higher short-circuit current density. Additionally, the OC4-4Cl-C8 film exhibits a longer exciton diffusion distance and the D18:OC4-4Cl-C8 blend film displays faster hole transfer, weaker bimolecular recombination, and more efficient exciton transport. Furthermore, the D18:OC4-4Cl-C8 blend films can form good nano fibril-like interpenetrating networks, which can facilitate exciton dissociation and charge transport. Finally, OC4-4Cl-C8 based devices can generate an excellent PCE of 16.56%, which is much higher than OC4-4Cl-Ph (12.29%) and OC4-4Cl-Th based (11.00%) ones, being the highest PCE among the NFREA based binary devices. All in all, we have demonstrated that side-chain engineering is an efficient way to achieve high-performance NFREAs.

Many membraneless organelles, or biological condensates, that play key roles in signal sensing and transcriptional regulation form through phase separation. While the functional importance of these condensates has inspired many studies to characterize their stability and spatial organization, the underlying principles that dictate these emergent properties are still being uncovered. In this review, we examine recent work on biological condensates, especially multicomponent systems. We focus on connecting molecular factors such as binding energy, valency, and stoichiometry with the interfacial tension, explaining the nontrivial interior organization in many condensates. We further discuss mechanisms that arrest condensate coalescence by lowering the surface tension or introducing kinetic barriers to stabilize the multidroplet state.